Cabinets: 1x12 and 1x12 OS Wave

The Port City Wave™ cabinets are totally unique in their appearance however, the magic of this cabinet lies within. This patent pending design is truly something special. The Port City Wave™ cabinet is constructed with a 45-degree angle sound deflecting panel located at the back of the cabinet. (Between the top of the cab and the backpanel.) This panel is dadoed on both sides of the cabinet for ultimate support. Internal sound waves are projected from the back of the speaker down to the bottom of the cabinet where another 45-degree panel projects sound waves towards the front of the cabinet. From there an angled port which runs the width of the cabinet and projects these sound waves out and up towards you. This allows those sound waves from the rear of the speaker to mix with the sound waves from the front of the speaker. This gives an effect similar to that of your sound coming from a PA system. Your tone is balanced, full and clear.

The 1x12 and 1x12 OS Port City Wave cabinet can match most 2x12 cabinets in its volume and depth. When you dig into a bend or chord you can hear and feel the difference with this cabinet. Good tone is vital to a good musician, however, great tone and lots of it is what great musicians deserve. The design, while simple, is proven. At Port City we are sure you will love your Wave cabinet once you finally hear what you've been missing!

1x12: Loaded $550, Unloaded $425
1x12 OS: Loaded $585, Unloaded $450

Choice of speakers:
Celestion:
V30
G12-65 $60 upcharge
G12H $85 upcharge

Eminence:
Governor
Wizard
Private Jack
Legend
Cannabis Rex
Texas Heat
Black Powder
Red/White and Blues

Jensen:
Blackbird $115 upcharge

Upgrades:
Custom tolex and/or grillcloth $50

SPECS
• All Port City cabinets are built and covered by hand in the USA.
• The outer shell is crafted from lap jointed 13 ply Baltic birch.
• The baffle and back panel are made from 1⁄2 inch Birch ply.
• Metal recessed handle centered for balance on the top of the cabinet.
• Large rubber feet.
• Each Port City Wave cabinet is wired with a hand soldered wiring harness made of 18 gauge wire and Switchcraft 1⁄4 jack.
• All mounting hardware is included in unloaded cabinets.

DIMENSIONS
1x12: 17h x 11 1/2d x 18w
Weight unloaded 24lbs.

1x12 OS: 17h x 11 1/2d x 22w
Weight unloaded 28lbs.

Old frames are available upon request. To see that version, click HERE.